Skip to main content
Skip to sub nav
Menu
Chuck Zhang

Chuck Zhang

Harold E. Smalley Professor and Director of NSF Industry/University Cooperative Research Center (IUCRC) for Composite and Hybrid Materials Interfacing (CHMI)
Georgia Tech Manufacturing Institute

Contact Information

Groseclose 318 and GT Manufacturing Institute 374 (Callaway Manufacturing Research Center Building)
404.894.3280
404.385.0812

Education

Ph.D. Industrial Engineering (1993), The University of Iowa
M.S. Industrial Engineering (1990), State University of New York @ Buffalo
B.S. Mechanical Engineering (1984), Nanjing University of Aeronautics and Astronautics, China
M.S. Mechanical Engineering (1987), Nanjing University of Aeronautices and Astonautics, China

Chuck Zhang

Quicktab - Person

Dr. Chuck Zhang is the Harold E. Smalley Professor in the H. Milton Stewart School of Industrial and Systems Engineering at Georgia Institute of Technology. He is also an affiliated faculty member of Georgia Tech Manufacturing Institute. He serves as the Director of a newly established NSF Industry/University Cooperative Research Center (IUCRC) for Composite and Hybrid Materials Interfacing (CHMI). Prior to joining Georgia Tech, he served as Professor and Chair in the Department of Industrial & Manufacturing Engineering Florida A&M University-Florida State University College of Engineering and the Deputy Director of the High-Performance Materials Institute at the Florida State University. Dr. Zhang received his Ph.D. degree (1993) in Industrial Engineering from the University of Iowa. Prior to the doctoral degree, he received an MS degree (1990) in Industrial Engineering from the State University of New York at Buffalo, and BS (1984) and MS (1987) degrees in Mechanical Engineering from Nanjing University of Aeronautics and Astronautics in China.

Dr. Zhang’s research interests include additive manufacturing (3D printing and printed electronics), scalable bio-/nano-manufacturing, advanced composite structures manufacturing and maintenance, and manufacturing cybersecurity. Most recently, he leads the 3-university (Georgia Tech (Lead), Oakland University and University of Tennessee/Knoxville) NSF CHMI IUCRC Center on developing advanced materials, manufacturing and data science techniques and tools for composite and hybrid materials joining/bonding and repair. As PI and Co-PI, Dr. Zhang has led or conducted over 60 research projects (totaling more than $22 Million) sponsored by federal agencies including National Science Foundation, National Institute of Standards and Technology, Department of Defense, Food and Drug Administration and Department of Veterans Affairs, as well as industrial companies and foundations such as ATK, Cummins, Delta Air Lines, General Dynamics, Hexcel, Lockheed Martin, Marcus Foundation, Raytheon, Solvay, and Top Flight. He has published over 220 refereed journal articles. He also holds 27 U.S. patents.

Dr. Zhang serves as an editor of Composites Part B: Engineering, a top international journal in the field of composite science and engineering (with an impact factor of 11.32 (2022)). He is also a Department Editor for the Design and Manufacturing Focus Issue of IISE Transactions, the flagship journal of the Institute of Industrial and Systems Engineers (IISE). Dr. Zhang received various awards for his research and teaching, including the Honorable Mention for the Best Application Paper in the 2020 IISE Transactions Focus Issue on Quality and Reliability Engineering (2021), R&D 100 Award for “3D Printed Patient-Specific Tissue-Mimicking Phantoms” by R&D Magazine (2018), TechConnect Innovation Award for “3D Printed Meta-material Tissue-Mimicking Phantoms” by TechConnect (2018), IEEE Transactions on Automation Science and Engineering Best Paper Award (2018), Society of Automotive Engineers (SAE) Ralph R. Teetor Educational Award (2001), and Society of Manufacturing Engineers (SME) Outstanding Young Manufacturing Engineer Award (1999). He is a Fellow of IISE.

Expertise:
  • Additive Manufacturing
  • Biomanufacturing
  • Composite Manufacturing and Maintenance
  • Modeling, Sensing and Informatics for Manufacturing
  • Nanomanufacturing
Innovator Award, Florida State University 2008, 2009 and - 2011
GAP Award, Florida State University - 2009
Outstanding Paper Award, SAMPE Fall Technical Conference - 2006
Listed in Who’s Who in Science and Engineering 1997 - 1998, 2003 - 2005
Best Poster Award, International Conference on Multiscale Materials Modeling - 2002
Society of Automotive Engineers (SAE) Ralph R. Teetor Educational Award - 2001
United Nations Development Program Fellowship - 2000
Listed in Who's Who in Plastics & Polymers - 2000
Society of Manufacturing Engineers (SME) Outstanding Young Manufacturing Engineer Award - 1999
Rockefeller Foundation CBI Fellowship - 1998
Florida State University TIP Teaching Award - 1997
ISyE location map

Georgia Tech Supply Chain and
Logistics Institute
H. Milton Stewart School of
Industrial & Systems Engineering
765 Ferst Drive, NW, Suite 228
Atlanta, GA 30332
Phone: 404.894.2343